Translate with Google

Saracen Winterhoff (FHL200) User Manual

23/04/2021

Saracen Winterhoff logo

CARAVAN AND TRAILER HITCH LOCK

Installation guide and user manual

SCM logo

FHL200 Line Diagram

 


PDF DOWNLOAD

FHL200 Manual Cover

To download this manual as a PDF document, click below. [English, German, Dutch]

DOWNLOAD

 


PARTS IDENTIFICATION & FITTING DIAGRAM

  1. Side A
  2. Side B
  3. Female Lock Portion
  4. Male Lock Portion
  5. Spacer (x2) 
  6. Key (x2)
  7. Hex Key
  8. Security Tow Ball
  9. Hex Grub Screws

 FHL200 Components

 FHL200 assembled

 FHL200 Pin location

 


ASSEMBLY & INSTALLATION

The FullStop® Saracen Winterhoff Hitch Lock can be fitted when your vehicle is hitched or unhitched, but should never be fitted during transit. It is against the law in the UK to tow whist using a Hitch Lock.

 

 FHL200 Lock Installation

  


FITTING WHEN HITCHED

The Saracen Winterhoff Hitch Lock is supplied ready assembled as two parts for easy fitment.

To install, simply locate the metal pin (a) on Side A (1) into the aperture on the side of the Winterhoff WS3000 stabiliser hitch. Insert the key into the lock and rotate 90° clockwise to unlock. Then locate the pin (a) on Side B (2) into the other side of the hitch and align the end of the male lock portion (4) into the end of the Female Lock Portion (3). Once aligned you should be able to turn the key 90° anti-clockwise and remove the key. Once installed the assembled Hitch Lock will fit together as shown in Fig.A. Your Hitch Lock is now fitted correctly.

If you cannot get the male and female lock portions to lock together it may be necessary to remove one or both of the spacers (5) this will allow the two locking portions to meet while giving a greater distance between the two side faces (A&B). 

To remove a spacer use the supplied hex key (7) and undo one or both of the small hex grub screws (9); this releases the male and female lock portions to enable removal of the spacer(s).

 


FITTING WHEN UN-HITCHED

Installation of the Saracen Winterhoff Hitch Lock when fitting onto an unhitched caravan, is identical except that the included Security Tow Ball (8) must be inserted into your coupling to inhibit the caravan being hitched onto a vehicle.

 


MAINTENANCE

Grease the lock face and ball bearings before first use, with a light oil such as 3-IN-ONE or equivalent. 

Thereafter spray any moving parts of the lock body with a light oil such as 3-IN-ONE or equivalent every eight weeks.

 


NOTE

Warning iconIMPORTANT! HITCH LOCK MUST BE REMOVED BEFORE TOWING

It is against the law to have a Hitch Lock attached during transit. Please adhere to the warning sticker on the product at all times. 

It is highly recommended that a secondary security device (such as a wheel clamp) should be used to inhibit theft by some unconventional form of towing. Visit www.purpleline.co.uk for details of other products in the Fullstop® Security range.

 


PRODUCT REGISTRATION

Please store your keys in a safe place and remember to register your product.

Registration is quick and simple, go to www.purpleline.co.uk/product-registration. Please register within 14 days of purchase. Please retain your original purchase receipt. 

 


PRODUCT SPECIFICATION

FHL200
Weight 2.2kg
Height 102mm
Width 75mm
Depth 170mm
Keys Supplied 2

 


DISCLAIMER

If used properly, your FullStop® product will be an effective deterrent. However, nothing can stop the efforts of the most determined thief, and to this end no liability is accepted for any loss and/or damage caused by any illegal activity including theft or vandalism. Liability also not accepted for any loss and/or damage arising from misuse, unauthorised repair or alteration and failure to follow the user guide directions. No form of consequential loss what so ever will be accepted. 

Photographs for illustration purposes only. Actual product may differ slightly. Purple Line Limited reserve the right to alter product specification without prior notice.

0521