Will the Enduro fit my caravan?
The Enduro is suitable for L and U profiled chassis with a chassis thickness between min. 2.8mm and max. 3.5mm. The standard installation kit only provides parts for installing the mover within the measurements shown in the following diagram.
The ground clearance from the bottom of the chassis must be a minimum of 165mm - the Enduro will decrease by 50mm.
Are there adaptor kits available for non standard chassis?
Yes. For BPW flat frame, Vario III one-piece, Vario III two-piece. Also available for shallow type chassis are spacer kits. Please verify the height of your chassis in order to determine type of adaptor or spacer necessary. Please contact us for further information..
Will the Enduro fit on twin axle caravans?
The Enduro is suitable for single and twin axle caravans when using the appropriate electronics.
Can I fit the Enduro myself?
Please review the User Manual which may help you to decide if self-fit is an option, or contact us for further advice. Alternatively, please contact your dealer or a mobile fitter.
Does the Enduro have soft start and stop?
It has precision control operation and provides excellent accuracy.
Where is the best location for the mover?
The best location for the Enduro is in front of the axle. However if this is not possible it is usually possible to fit behind the axle. Please contact us or your dealer for advice.
Does it fit on a caravan with shock absorbers?
Where do I find the serial numbers?
The serial numbers are located on the ends of the motor assemblies; there are two serial numbers, one on each motor and both numbers must be provided when completing your product registration.