home > products > enduro > faq

Frequently Asked Questions

Will the enduro fit my caravan?
The enduro is suitable for L-profiled chassis with a chassis
thickness between min. 2.8mm and max. 3.5mm.
The standard installation kit only provides parts for
installing the mover within the measurements shown below

The ground clearance must be minimum of 165mm - the Enduro will drop down approximately 50mm from the chassis.

Are there adaptor kits available for non L-profile chassis?
Yes. For BPW flat frame, Vario III one-piece, Vario III two-piece, and Al-Ko U-profile.
Also available for shallow type chassis are spacers kits. Please verify the height of your chassis in order to determine type
of adaptor or spacer necessary. Please call 0870 444 8688 for further details and prices (or contact us).

Will the enduro fit on twin axle caravans?
The enduro is suitable for single axle caravans. Please see enduro2 and quattro for more details on movers for twin axle caravans.

Can I fit the enduro myself?
Please review the User Manual which may help you to decide if self-fit is an option,
or call 0870 444 8688 for your free installation guide on DVD (or contact us)
if not please contact your dealer or a mobile fitter.

Does the enduro have soft start and stop?
It has precision control operation and provides excellent accuracy.

Where is the best location for the mover?
The best location for the enduro is in front of the axle. However if this is not possible it is usually
possible to fit behind the axle.

Does it fit on a caravan with shock absorbers?
Yes.

What is the warranty information?

For warranty details, please visit the warranty page here